NanoKING board is specially designed for sumo robots.
Each digital and analog pin is connected to small valued current limiter resistors. So there is no worry about burning Arduino Nanos.
Board Features
- Extra regulator for using the board and Arduino nano at high voltages (12V to 24V with usage of that regulator to Arduino Nano)
- Extra capacitors for good electical stability.
- Output and input terminals (Molex type male headers) for easy sensor connection.
- Built-in Tactical Switch (In total 8 Different Combination)
- Bult-in Trimpot for changing, setting input variables
- Buzzer and led tied to pins for indicator usage.
Board Pin Lookup Table
- Tactical Switch: A5-A6-A7 (A6 and A7 can be only used as analog input pins so write program regarding to these)
- Trimpot: A4
- Buzzer: A0
- Led: A1
- Analog Inputs: A2-A3 (Can be used for Edge Sensors)
- Digital Pins Outputs (From D13 to D0): These pins have molex type connectors (Except D0 and D1) for easy sensor adding. And can be used with 5V or 12V Voltage sensors. You can tie your sensors to this connectors. We suggest you to use open collector type infrared sensors.
Extra Voltage Regulator And Settings
At right side board includes one SMPS type voltage regulator. These regulator’s output voltage can be used at Digital Pin Headers, Arduino Nano Input Voltage and Analog input side.
